finally got back to building some cape from stock i had on hand with the new boards i ordered many moons ago
just a power input pin fix and some pretty labelling
also in these pictures are the Dallas 1wire temp sensors soldered on, with pins broken out for add on sensors
EEPROM Solder Jumpers WP Bridged enables eeprom write
A0 and A1 Bridge equal Cape Manager Cape Slot Zero and i2c reference number of 2-0054
in Kernel 4 nvmem changes have become mainline too
so eeprom is now at
for Cape Slot Zero “/sys/bus/nvmem/devices/at24-1/nvmem” not the old location of “/sys/bus/i2c/devices/1-0054/eeprom”
i2c bus reference for eeproms also changed from 1 to 2 for reasons…
Overlays for Kernel Version 4 and above
Shane worked up the DTS file for all the features on this cape
These are wrong new ones soon
BBB-WACAN-GPS-00A0.dts
BBB-WACAN-GPS-00A0 dts and dtbo